![Bontempi iSound 42 5030 Owner'S Manual Download Page 6](http://html1.mh-extra.com/html/bontempi/isound-42-5030/isound-42-5030_owners-manual_2787473006.webp)
4
SWITCHING ON-OFF / VOLUME
Switch on the instrument turning the knob
and
adjusting the volume at the desired level.
DEMOSONG
This keyboard has 10 demosongs.
To choose the pre-recorded tracks, press the MUSIC key
k
in succession.
Press PAUSE
i
to interrupt.
SOUND EFFECTS
Press APPLAUSE
c
to listen to the sound effects: crowd
sounds and applauses.
VOICE CHANGER
Press VOICE CHANGER
j
to alter your voice when
using the microphone. There are 2 different effects.
VOICE RECORDING
To record your voice, press SOUND RECORDING
h
. To
listen to the recording, press SOUND RECORDING again.
HOW TO PLAY THE MUSIC ON A
SMARTPHONE OR OTHER MP3 PLAYER
With the jack cable
m
supplied you can connect an
external audio source (MP3 player, tablet, smartphone,
etc.).
1. Insert the cable into the MP3 socket
f
.
2. Insert the other end of the cable into the “HEADPHONE”
socket
n
of your music player or other audio source.
3. Turn on the player, or other music sources and adjust
the volume to balance the voice with the music; the
reproduction will be monophonic because of the
instrument.
HOW TO EXCLUDE THE VOICE OF A SONG
AND SING KARAOKE
When a song is playing, move the selector
g
to
ACCOMPANIMENT SONG. And as if by magic, only the
accompaniment of the song is left: now you are the
singer!
LED ON/OFF
Press the LIGHT button
b
to activate or deactivate the
light effects of the keys.
POWER SUPPLY
Use a screwdriver to open
the battery compartment.
Insert 3 x 1.5 V
batteries R6/AA (not
supplied), ensuring
correct polarity
(+/–)
. Re-fit battery cover. Replace
batteries when the quality of sound becomes bad.
Use alkaline batteries to obtain a longer duration
.
ATTENTION - BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries
must be removed from the product before being charged. • Rechargeable
batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted with correct
polarity. • Remove exhausted batteries to prevent leakage. • Do not short
circuit supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment
by disposing of batteries in the special containers
provided for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to
the appropriate waste collection centres. Plastic material must be placed in
the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code 02 for PE-HD, 04
for PE-LD •
PVC
=Polyvinyl chloride •
PP
= Polypropylene •
PS
= Polystyrene,
Polystyrene foam •
O
= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated collection
point or recycling facility. Alternatively, check with your retailer
and return the product when buying a replacement, on a one-to-one basis or
as free of charge in case the size is smaller than 25 cm. Appropriate disposal
promotes the recycling of parts and materials, as well as helping to protect
the environment and human health. Under current legislation, strict
penalties are enforced against those disposing of products illegally. For more
information about the collection of special waste, contact your Local
Authority.
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
ALIMENTATION
Ouvrir l’emplacement
porte-piles avec un
tournevis. Insérer 3 piles
de 1,5 V type R6/AA (non
fournies), en faisant
attention à la polarité correcte
(+/–)
. Remettre le
couvercle à son emplacement. Substituer les piles quand
la qualité du son devient mauvaise.
Utiliser des piles
alcalines pour obtenir une longue durée
.
CONSEILS POUR L’UTILISATION DES PILES:
• Enlever les piles
déchargées de l’emplacement porte-piles. • NE PAS recharger des piles qui ne
sont pas “rechargeables”. • Pour recharger les piles, les enlever de leur
emplacement. • Recharger les piles avec la supervision d’un adulte. • Insérer
les piles avec la polarité correcte. • Ne pas utiliser des types de piles
différents ou des piles neuves et piles déchargées en même temps. • Utiliser
seulement des piles du type recommandé ou équivalentes. • Ne pas court-
circuiter les terminaux d’alimentation. • Enlever les piles quand l’instrument
n’est pas utilisé pendant une longue période.
REGLES POUR ECOULEMENT DES ORDURES:
Pour
l’écoulement des matériaux indiqués ci-dessous, se renseigner auprès des
Administrations Communales au sujet des centres d’écoulement spécialisés.
1 - ÉCOULEMENT DES PILES - Pour aider la protection
de l’environnement ne pas jeter les piles déchargées
parmi les ordures normales, mais dans des conteneurs
spéciaux situés dans les centres de ramassage.
2 - ECOULEMENT DES EMBALLAGES - Remettre les emballages en papier,
carton et carton ondulé dans les centres d’écoulement spécifiques. Les parties
en plastique de l’emballage doivent être placées dans les conteneurs pour la
récolte prévus à cet effet.
Les symboles qui repèrent les différents types de plastique sont:
Légende relative au type de matériau plastique
•
PET
= Polyéthylène téréphtalate •
PE
= Polyéthylène, le code 02 pour
PE-HD, 04 pour PE-LD •
PVC
= Chlorure de Polyvinyle •
PP
= Polypropylène •
PS
= Polystyrène, Polystyrène expansé •
O
= Autres polymères (ABS, Couplés,
etc.)
3. DISPOSITION POUR APPAREILS ÉLECTRIQUES - Le symbole de
la poubelle à roues avec une croix indique que le produit ne doit
pas être déposé dans les ordures ménagères à la fin de son cycle.
Il doit être mis dans un point de collecte ou de recyclage
approprié. A défaut, vérifier avec votre revendeur et retourner le
produit lors de l’achat du produit de remplacement ou, si la dimension est
inferieur à 25 cm, on peut le retourner gratuitement.. La disposition
appropriée promeut le recyclage des parties et des matériels, aussi bien quel
‘aide pour protéger l’environnement et la santé humaine. Conformément à la
législation actuelle, des pénalités strictes sont faites contre ceux disposant
des produits illégalement. Pour plus d’informations sur la collecte de déchets
spéciaux, contacter la Collectivité locale.
E N G L I S H
F R A N Ç A I S