Bomag BMP 8500, Operating And Maintenance Instructions Manual

Page: 111 / 128

Trouble shooting
BOMAG 111 BMP 8500
Fault codes of remote control
2023 Engine is shut down Output valve steer-
ing left, Y 238
Although the output is
switched off, voltage is
present
Current path con-
nected to +12V X3:21 1020
1021
1022
Code Fault reaction Description of fault Possible cause Terminal
on BLM Input
code for
diag-
nose
Code Fault reaction Description of fault Possible cause
2500 Engine is stopped, all func-
tions are locked, horn
sounds Operation of two remote
control system at the same
time A remote control with cable
and a wireless remote con-
trol are operated at the same
time.
2600 Engine stopped, emergency
stop relay in the control is
switched off, all outputs on
control are switched off Remote control emergen-
cy stop Emergency stop on remote
control operated
2601 Engine stopped, emergency
stop relay in the control is
switched off, all outputs on
control are switched off Fault in data transfer be-
tween remote control
sender and receiver Battery empty
Radio signal transmission is
disturbed
Distance between sender an
machine too big
2605
*
Engine stopped, emergency
stop relay in the control is
switched off, all outputs on
control are switched off Receive signal too weak Radio signal transmission is
disturbed
Distance between sender an
machine too big
2611 Engine is shut down. CANopen – fault in bus
communication
2612 Engine is shut down. CANopen – fault in bus
communication
2613 Engine is shut down CANopen – fault in bus
communication
* Output of error code 2605 only with software version older than 1.11!