Bomag BMP 8500, Operating And Maintenance Instructions Manual

Page: 3 / 128

Foreword
BOMAG 3 BMP 8500
F orew ord BOMAG machines are products from the wide
range of BOMAG compaction equipment.
BOMAG’s vast experience in connection with
state-of-the-art production and testing meth-
ods, such as lifetime tests of all important
components and highest quality demands
guarantee maximum reliability of your ma-
chine.
This manual comprises:
l
Safety regulations
l
Operating instructions
l
Maintenance instructions
l
Trouble shooting
Using these instructions will
l
help you to become familiar with the machine.
l
avoid malfunctions caused by unprofessional
operation.
Compliance with the maintenance instructions will
l
enhance the reliability of the machine on con-
struction sites,
l
prolong the lifetime of the machine,
l
reduce repair costs and downtimes.
BOMAG GmbH will not assume liability for the
function of the machine
l
if it is handled in a way that does not comply
with the usual modes of use,
l
if it is used for purposes other than the ones it
is intended for (see safety regulations).
No warranty claims can be lodged in case of dam-
age resulting from
l
operating errors,
l
insufficient maintenance and
l
wrong fuels and lubricants.
Please note!
This manual was written for operators and mainte-
nance personnel on construction sites.
Always keep this manual close at hand, e.g. in the
tool compartment of the machine or in a specially
provided container. These operating and mainte-
nance instructions are part of the machine.
You should only operate the machine after you
have been instructed and in compliance with these
instructions.
Strictly observe the safety regulations.
Please observe also the guidelines of the Civil En-
gineering Liability Association ”Safety Rules for
the Operation of Road Rollers and Soil Compac-
tors” and all relevant accident prevention regula-
tions.
For your own personal safety you should only
use original spare parts from BOMAG.
In the course of technical development we re-
serve the right for technical modifications
without prior notification.
These operating and maintenance instructions are
also available in other languages.
Furthermore, the spare parts catalogue is availa-
ble from your BOMAG dealer against the serial
number of your machine.
Your BOMAG dealer will also supply you with in-
formation about the correct use of our machines in
soil and asphalt construction.
The above notes do not constitute an extension of
the warranty and liability conditions specified in the
general terms of business of BOMAG GmbH.
We wish you successful work with your BOMAG
machine.
BOMAG GmbH
Printed in Germany
Copyright by BOMAG
FCC Notice
1)Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
2)This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
3)This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.