Bolide SVR9500H Series User Manual Download

Page: 61 / 261

USER MANUAL

5.2.2.2 Record Schedule

This menu allows you to specify when the DVR records video and defines the recording mode for

each channel. The recording schedule lets you set up a schedule like, daily and hourly by normal

(continuous) recording, motion recording, I/O alarm recording & PIR recording (if your DVR

supports it). To set the recording mode, first click on the mode radio button (Normal, Motion, IO,

PIR), then drag the cursor to mark the slots. The recording schedule is valid only for one channel.

If you want to use the same recording schedule for other channels, use the

Copy

function. Click

Apply

to save your settings.

Channel

: Select the channel to set its recording parameters.

Normal

: When the time slot is marked green, this indicates the channel performs normal

recording

for that time slot.

Motion

: When the time slot is marked yellow, this indicates the channel records only when

motion is detected during that time slot.

: When the time slot is marked red, this indicates the channel records only when the sensor

triggered during that time slot.

PIR

: When the time slot is marked purple, this indicates the channel records only when the PIR

triggered during that time slot.

No Record

: A time slot marked black means that there is no recording scheduled for the time slot.

Summary of Contents for SVR9500H Series






































































































































































































































































Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands

Bolide SVR9500H Series, User Manual

Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands