USER MANUAL
1.
Rule Number is the number of virtual lines you can draw. Maximum 4 lines.
2.
Rule Switch
enables the detection.
3.
Choose a
Rule Type
Object
: Will count only moving objects.
Pedestrian
: Will count only moving people.
4.
You can draw a virtual line by clicking 2 points with your mouse. Enter is from Side A to Side
B is Enter; Exit is from Side B to Side A.
5.
Click
Save
to save your settings.
6.
If you want to modify the position or length of the line, click the red box next to the line, the line
will turn red. Press and hold the left button of your mouse to move the line, or drag the
terminals to modify the length or position of the line.
7.
If you want to remove one of the lines from the camera picture, click the red box next to the
line and then click
Remove
. Clicking
Remove All
will delete all lines.
Notice:
1)
The lines should not be too close to the edges of the picture, to ensure the alarm is triggered
when the target crosses through it.
2)
The lines should be in an area that the detected object can reach.
3)
The lines should not be set too short, to ensure the alarm is triggered alarm when the target
crosses through it.
Learn how to search & view the statistical results of cross counting in
5.1.8.7 Intelligent
Analysis
.
50
Summary of Contents for SVR9500H Series
Page 1: ...b ...
