Bolide SVR9500H Series User Manual Download

Page: 119 / 261

USER MANUAL

2. Select a day on the calendar to search for recordings. Days with recordings will be

underlined in red.

3. Select the recording type from the dropdown next to

Type

, or select

All

to search for

all recordings.

4. Choose the video stream you want to search & play. If you want to play Substream

recordings, please make sure you have set the DVR to record with Dualstream at

5.2.2.1

Record

5. Check the channels you would like to search through for recordings. Check

Synchronous

playback

to play all channels at once.

6. Click

Search

7. Recordings that fit your search will be displayed in the timeline. Click a section of the video

where you would like to begin the playback and click .

7.3.2.1 Playback Control Buttons

Play the recordings

Pause

Stop

Go Forward One Frame:

Move frame-by-frame through playback. Only available when the

Synchronous playback

option is not checked.

Click on one of the channels that is being played and click the record button to record

current video to your computer. Click again to stop recording.

Click on one of the channels that is being played and click the capture button to take a

snapshot and save to your computer.

Opens the Download menu, which allows you to download several video recordings at once.

113

Summary of Contents for SVR9500H Series






































































































































































































































































Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands

Bolide SVR9500H Series, User Manual

Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands