USER MANUAL
Notice:
1) To avoid any failure to trigger the alarm when the target crosses through it, the lines should not
be too close to the edges of the picture.
2) To avoid any failure to trigger the alarm when the target crosses through it, the lines should not
be set too short.
Alarm
: Click
to set the
parameter settings
of LCD:
Channel
:
Select the channel you want to configure
Buzzer
: Set the buzzer to emit an alarm tone for 10, 20, 40 or 60 seconds when the
detection is
triggered
Alarm Out
: If your DVR supports a connection to an external alarm device, you can set it to emit
an alarm
tone.
Latch Time
: To configure the external alarm time when the detection is triggered.
Record Channel
:
To select the channel(s) you want to record when a detection is triggered.
Post Recording
: You can set how long the DVR will continue to record after an event has
occurred.
Show Message
:
A letter “S” will be displayed on the screen when the LCD function is triggered.
Send Email
:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen
:
When the detection is triggered, the channel will go into full screen mode.
40
Summary of Contents for SVR9500H Series
Page 1: ...b ...
