USER MANUAL
37
5.1.9.1 PID (Perimeter Intrusion Detection)
Perimeter Intrusion Detection function detects people, vehicle or other objects which enter and
loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is
triggered; Click
to
parameter setting
of PID:
Channel
:
Select the channel you want to configure
Buzzer
: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Alarm Out
:
If your DVR support to connect to external alarm device, you can set to emit an alarm
tone, also to select local alarm or select all to alarm of the external and local device
Latch Time
:
To configure the external or local alarm time when the detection is triggered.
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
Post Recording
:
You can set how long after an event occurs that the DVR will continue to record.
Show Message:
A letter “S” will be displayed on the screen when the PID function is triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Summary of Contents for SVR9500H Series
Page 1: ...b ...
