Bolide SVR9500H Series User Manual Download

Page: 203 / 261

USER MANUAL

NOTICE:

To make sure all settings are correct, click

Test Email

. The system sends an automated

email message to your inbox. If you received the test email, it means the configuration parameters

are correct.

5.4.3.2 Email Schedule

You need to configure the schedule to fully implement the Email notification.

The color codes on email schedule have the following meanings:

Green

: Slot for Motion detection.

Yellow

: Slot for I/O Alarm (optional).

Red

: Slot for Exception (HDD full, HDD error, or Video Loss).

Purple

: Slot for PIR (optional).

Summary of Contents for SVR9500H Series






































































































































































































































































Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands

Bolide SVR9500H Series, User Manual

Search results

Summary of Contents for SVR9500H Series

Reviews:

Related manuals for SVR9500H Series

Brands by name

Popular brands