Body Solid G9U Owner'S Manual Download

Page: 26 / 70

NOTE:
You will need to loosen two Allen Screws (88) inside Seated Press Arm
Support (AA), in order to remove shaft (AB).

Attach Seated Press Arm Support (AA) to Top Main Frame (G) with Shaft (AB).
Tighten Allen Screw (88) in Seated Press Arm Support (AA).

Attach two Pulleys (26) to Seated Press Arm Support (AA) using:

Two 76 (3/8”x 1 3/4” hex head bolt)
Four 94 (3/8” washer)
Two 91 (3/8” nylon lock nut)

NOTE:
You will need to loosen two Allen Screws (88), inside Seated Press Arm (AC), in
order to remove shaft (AD).

Attach Seated Press Arm (AC) to Seated Press Arm Support (AA) with Shaft (AD).
Tighten two Allen Screws (88) in Seated Press Arm Support (AA) and in Seated
Press Arm (AC).

Attach two End Caps (14) to the top of Seated Press Arm Support (AA).
Attach two End Caps (15) to the top of Seated Press Arm (AC).

Attach Small Shroud (AE) to Seated Press Arm Support (AA) using:

Four 86 (

M8 x 16L

round allen head

)

Four 97 (

washer

)

Note:
You should now wrench tighten all bolts and nuts in this step.
Do NOT re-tighten any of the pad bolts or pulley bolts.

Be careful to assemble all components
in the sequence they are presented.

S T E P

Inch

Most of the main frame parts in this step will have RED dots.

Summary of Contents for G9U







































































Search results

Summary of Contents for G9U

Reviews:

Related manuals for G9U

Brands by name

Popular brands

Body Solid G9U, Owner'S Manual

Search results

Summary of Contents for G9U

Reviews:

Related manuals for G9U

Brands by name

Popular brands