Body Solid G9U Owner'S Manual Download

Page: 58 / 70

A d j u s t m e n t s

PEC DEC ARM (AK) or (AP) ADJUSTMENT

Grasp Pec Dec Arm (AK) or (AP).

Pull the Ball Head Pop Pin (50) to release the Pec Dec Arm (AK) or (AP).

Adjust the Pec Dec Arm to the desired position.

Release the Ball Head Pop Pin (50) and make sure that it is fully engaged into the
selector hole.

PEC DEC SEAT PAD (AW) ADJUSTMENT

Grasp the Pec Dec Seat Pad (AW).

Turn the T-Shaped Pop Pin (48) counter clockwise to unlock it, then pull to release the
Pec Dec Seat.

Adjust the Pec Dec Seat Pad to the desired position.

Release the T-Shaped Pop Pin (48) and make sure that it is fully engaged into the
Pec Dec Seat Frame (AV). Turn clockwise to lock it in place.

LEG PRESS BACK PAD (BQ) ADJUSTMENT

Grasp the Leg Press Back Pad (BQ).

Turn the T-Shaped Pop Pin (48) counter clockwise to unlock it, then pull to release the
the Leg Press Back Pad.

Adjust the Leg Press Back Pad to the desired position.

Release the T-Shaped Pop Pin (48) and make sure that it is fully engaged into the
selector hole in the Leg Press Back Pad Frame. Turn clockwise to lock it in place.

Summary of Contents for G9U







































































Search results

Summary of Contents for G9U

Reviews:

Related manuals for G9U

Brands by name

Popular brands

Body Solid G9U, Owner'S Manual

Search results

Summary of Contents for G9U

Reviews:

Related manuals for G9U

Brands by name

Popular brands