BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 71 / 286

65
The load setting made
by the Dynamic Damp-
ing Control is not a substitute
for manual adjustment of the
spring preload to the weight of
the rider, passenger and load.
Adjusting the spring preload
on the front wheel ( 108).
without Dynamic Damping
Control (DDC) OE
Adjusting the spring preload
at the rear wheel ( 110).
Switching on the ignition
( 54).
Press button 1 briefly to
display current setting.
Repeatedly press and hold
button 1 until the desired set-
ting is displayed.
The selection arrow 4 is dis-
played and goes away after the
changeover of the status.
The following settings are avail-
able:
One-up
Two-up (with luggage)
If button 1 is not pressed for
an extended period, the load
is adjusted as indicated.
RIDING MODE
Use of the riding modes
BMW Motorrad has developed
riding scenarios for your vehicle
from which you can select the
one matching your situation:
RAIN: Riding on roads that are
slick from rain.
ROAD: Riding on dry roads.
DYNAMIC: Dynamic riding on
dry roads.