BMW Motorrad S 1000 R 2020 Page 185 Rider'S Manual Download

Page: 185 / 286

179

preferably an authorized

BMW Motorrad retailer.

Checking the front brake pad

thickness

Park the vehicle, making sure

that the ground is firm and

level.

Turn handlebars.

Visually inspect the brake pad

thickness on the left and right.

Direction of view: from front,

looking at brake pads

Front brake-pad wear

limit

min 0.04 in (min 1.0 mm)

(Only friction material without

carrier plate. The wear marks

(grooves) must be clearly visi-

ble.)

If brake pads are worn:

WARNING

Dropping below the mini-

mum pad thickness

Reduced braking action, dam-

age to the brake

In order to ensure the oper-

ating reliability of the brake

system, make sure that the

brake pads are not worn be-

yond their minimum thick-

ness.

Have brake pads renewed

at a specialist workshop,

preferably an authorized

BMW Motorrad retailer.

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands

BMW Motorrad S 1000 R 2020, Rider'S Manual

Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands