BMW Motorrad S 1000 R 2020 Rider'S Manual Download Page 136

Page: 136 / 286

130

RIDING

ATTENTION

Contact of fuel and plastic

surfaces

Damage to surfaces (become

unattractive or cloudy)

Immediately clean plastic

surfaces after contact with

fuel.

Park the vehicle, making sure

that the ground is firm and

level.

Open the protective cover

Unlock the fuel tank cap

a clockwise direction using

the ignition key and fold it up.

Refuel with a fuel meeting the

specifications above, continu-

ing until fuel is no higher than

lower edge of the recess in

the fuel filler neck.

If refueling is carried out

after running on fuel re-

serve, the resulting filling ca-

pacity must be greater than the

fuel reserve so that the new

fill level is detected and the

fuel reserve indicator light is

switched off.

The "usable fuel quantity"

specified in the technical

data is the fuel quantity, which

can be refueled if the fuel tank

was completely emptied, i.e., if

the engine dies off due to lack

of fuel.

Usable fuel quantity

Approx. 4.4 gal (Approx.

16.5 l)

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

BMW Motorrad S 1000 R 2020, Rider'S Manual, Page: 136 / 286

Search results

Summary of Contents for S 1000 R 2020

Reviews: