BMW Motorrad S 1000 R 2020 Rider'S Manual Download Page 73

Page: 73 / 286

Setting Dynamic Pro

with riding modes Pro

Setting up the PRO riding

mode (

66).

Select

DYNAMIC PRO riding

mode

and confirm.

The

Engine

system is se-

lected. The current setting is

displayed as a diagram

with

explanations on the system

Select and confirm the sys-

tem.

You can browse through the

possible settings

and the re-

lated descriptions

Adjust the system.

The

Engine Brake

Traction (DTC)

Wheelie

(DTC)

and

ABS

systems can

all be adjusted in the same

way.

The settings of the respective

systems are retained even af-

ter the ignition is turned off.

More detailed information

about the systems can be

found in the chapter Tech-

nology in detail (

162).

The settings can be reset to

factory settings:

Riding mode settings reset

(

67).

Riding mode settings reset

Setting up the PRO riding

mode (

66).

Select

Reset

and confirm.

CRUISE CONTROL

with speed control

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

BMW Motorrad S 1000 R 2020, Rider'S Manual, Page: 73 / 286

Search results

Summary of Contents for S 1000 R 2020

Reviews: