BMW Motorrad S 1000 R 2020 Rider'S Manual Download Page 72

Page: 72 / 286

OPERATION

with riding modes Pro

DYNAMIC PRO: dynamic rid-

ing taking into account indi-

vidual settings made by the

rider.

The optimum interaction be-

tween engine characteristics,

ABS control, and DTC control is

provided for each of these sce-

narios.

Select riding mode

Switching on the ignition

(

54).

Press button

The active riding mode

fades

into the background and is

displayed in pop-up

. The

guide

shows how many rid-

ing modes are available.

Press button

repeatedly un-

til the desired riding mode is

shown.

For a changeover while riding,

the following steps must be

carried out:

Turn back throttle grip.

Do not actuate brake lever.

Deactivate the cruise control.

PRO RIDING MODE

with riding modes Pro

Adjustment options

The DYNAMIC PRO riding

mode can be individually

adjusted.

Setting up the PRO riding

mode

Switching on the ignition

(

54).

Go to

Settings

Vehicle

settings

menu.

Select and activate

Pro rid-

ing mode

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands

BMW Motorrad S 1000 R 2020, Rider'S Manual

Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands