BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 120 / 286

114 SETTING
the mark 2 points to a higher
scale value.
To decrease damping: Turn
adjustment screw with tool
from onboard tool kit so that
the mark 2 points to a lower
scale value.
Rebound stage, basic
setting, front
Position 4 (Road mode with
rider 187 lbs (85 kg))
Adjust the compression
damping on rear wheel
without Dynamic Damping
Control (DDC) OE
Park the vehicle, making sure
that the ground is firm and
level.
Adjust compression damping
via adjustment screw 1 .
To increase damping: turn
adjustment screw to the right
in + direction using tool from
onboard tool kit.
To reduce damping: turn ad-
justment screw to the left in –
direction using tool from on-
board tool kit.
Compression stage, ba-
sic setting, rear
Turn the adjustment screw 1
in direction + as far as it will
go, then 6 clicks in direc-
tion – . (Road mode with rider
187 lbs (85 kg))
Turn the adjustment screw
1
in direction + as far as it will
go, then 5 clicks in direc-
tion – . (Two-up mode with
load)