BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 80 / 286

74 OPERATION
Turn signals are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
with Keyless Ride
OE
Switch off the ignition.
Press button 1 on the radio-
operated key twice.
Activation takes approximately
30 seconds to complete.
Turn signals are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
To deactivate the motion sen-
sor (for example, if the motor-
cycle is being transported on
a train and the train's move-
ments could trigger the alarm
signal), press the button 1 on
the radio-operated key again
during the activation phase.
Turn signals are illuminated
three times.
Confirmation tone sounds
three times (if programmed).
Motion sensor is
deactivated.
Alarm signal
The DWA alarm signal can be
triggered by:
Motion sensor
Switch-on attempt with an
unauthorized ignition key.
Disconnecting the DWA from
the vehicle battery (DWA bat-
tery takes over the power
supply – alarm tone only, turn
signals do not flash)
If the DWA battery is dis-
charged, all functions remain
operational; the only difference
is that the alarm cannot be
triggered if the system is
disconnected from the vehicle
battery.
The duration of the alarm sig-
nal is approx. 26 seconds. Dur-
ing the alarm, an alarm signal
sounds, and the turn signals
flash. The type of alarm sound