BMS Beast 1000 Series, Owner'S Manual

Page: 57 / 114

WINCH GUIDE
55
WARNING
• If possible, keep the winch cable aligned with the centerline of the
winching vehicle. This will help the spooling of the winch cable and
reduce the load on the fairlead.
• If freeing a stuck vehicle by attaching to a tree, use an item such as a
tow strap to avoid damaging the tree during winch operation. Sharp
cables and chains can damage and even kill trees.
• Before operating the winch, be sure that the safety latch on the winch
cable hook is fully seated when the load is attached.
• Never operate your winch with a damaged hook or latch. Always
replace damaged parts before using the winch.
Yes No
5. Never remove the hook strap from the hook.
6. Release the winch clutch and pull out the winch cable.
7.
Pulling out as much cable as possible maximizes the winch’s pulling
capacity. Always be sure that at least five (5) full turns of winch cable are
wrapped around the winch drum at all times. The friction provided by this
wrapped cable allows the drum to pull on the winch cable and move the load.
Replace the winch cable at the first sign of damage to prevent SEVERE
INJURY or DEATH in the event of failure. For your safety, always replace
DW INDUSTRIES winch parts (including the cable) with genuine DW
INDUSTRIES replacement parts available at your authorized DW
INDUSTRIES dealer.