BMS Beast 1000 Series, Owner'S Manual

Page: 51 / 114

OPERATION
49
1. Determine water depths and current before entering water.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles.
4. Avoid operating through deep or fast-flowing water.
5. After leaving water, always dry the brakes by applying light pressure to the
pedal repeatedly until braking action is normal.
DRIVING IN REVERSE
Follow these precautions when operating in reverse:
1. Always check for obstacles or people behind the vehicle. Always inspect left
and right fields of vision before backing.
2. Always avoid backing downhill.
3. Back slowly.
4. Apply the brakes lightly for stopping.
5. Avoid turning at sharp angles.
6. Never open the throttle suddenly.
PARKING THE VEHICLE
1. Stop the vehicle on a level surface. When parking inside a garage or other
structure, be sure that the structure is well ventilated and that the vehicle is
not close to any source of flame or sparks, including any appliance with pilot
lights.
2. Place the transmission in PARK.
3. Turn the engine off.
4. Engage the parking brake (if equipped).
5. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
The large tires on your vehicle may cause the vehicle to float in deep or fast-
flowing water, which could result in loss of control and lead to serious injury or
death. Never cross deep or fast-flowing water with your vehicle
After running your vehicle in water, it's critical that you perform the services
outlined in the Periodic Maintenance Chart section. Give special attention to
engine oil, transmission oil, front and rear gearcases (if equipped), and all
grease fittings.
NOTE
WARNING