BMS Beast 1000 Series, Owner'S Manual

Page: 48 / 114

OPERATION
46
DRIVING ON SLIPPERY SURFACES
When driving on slippery surfaces such as wet trails, loose gravel, or ice, be
alert for the possibility of skidding and sliding. Follow these precautions when
encountering slippery conditions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down before entering slippery areas.
3. Maintain a high level of alertness, reading the trail and avoiding quick, sharp
turns, which can cause skids.
4. Engage all-wheel drive before wheels begin to lose traction.
5. Correct a skid by turning the steering wheel in the direction of the skid. Never
apply the brakes during a skid.
DRIVING UPHILL
Whenever traveling uphill, follow these precautions:
1. Avoid excessively steep hills.
2. ADC Models: Always operate in low gear and engage ADC 4X4 before
ascending or descending a hill.
3. Always travel straight uphill.
4. Keep both feet on the floor.
5. Always check the terrain carefully before ascending any hill. Never climb hills
with excessively slippery or loose surfaces.
6. Proceed at a steady rate of speed and throttle opening. Never open the
throttle suddenly.
WARNING
Skidding or sliding can cause loss of control or rollover (if tires regain
traction unexpectedly). When operating on slippery surfaces such as
ice or loose gravel, reduce speed and use extra caution to reduce the
chance of skidding or sliding out of control. Do not operate on
excessively slippery surfaces.
Severe damage to the drive train may occur if the AWD is engaged while the
wheels are spinning. Always allow the wheels to stop spinning before engaging
AWD.
NOTICE