BMS Beast 1000 Series, Owner'S Manual

Page: 19 / 114

SAFETY
17
CAB DOORS
Riding in this vehicle without closed and latched cab doors increases the risk of
serious injury or death in the event of an accident or rollover. Always make sure
all cab doors are closed and latched while riding in this vehicle. Cab doors are
NOT intended to be used as arm rests. Always keep hands and feet inside the
vehicle at all times.
FAILURE TO INSPECT BEFORE OPERATING
Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident.
Always perform the pre-ride inspection before each use of your vehicle to make
sure it's in safe operating condition. See the Pre-Ride Inspection Section for
details.
Always follow the inspection and maintenance procedures and schedules
described in this
owner’s manual. See the Maintenance Chart Key section for
details.
OPERATING WITH A LOAD ON THE VEHICLE
The weight of both cargo and operator impacts vehicle operation and stability.
For your safety and the safety of others, carefully consider how your vehicle is
loaded and how to safely operate the vehicle. Follow the instructions in this
manual for loading, tire pressure, gear selection and speed.
•
Do not exceed vehicle weight capacities.
The vehicle’s maximum weight
capacity is listed in the specifications section of this manual and on a label on
the vehicle. When more passenger weight is added, cargo weight may need
to be reduced accordingly.
• The recommended tire pressures are listed in the specifications section of this
manual and on a label on the vehicle.
Always follow these guidelines:
UNDER ANY OF THESE
CONDITIONS: DO ALL OF THESE STEPS:
Passenger and/or cargo exceeds half
the maximum weight capacity
1. Slow down.
2. Verify tire pressure.
3. Use extra caution when
operating.
Operating in rough terrain
Operating over obstacles
Climbing an incline
Towing