BMS Beast 1000 Series, Owner'S Manual

Page: 35 / 114

FEATURES AND CONTROLS
33
INDICATOR LAMPS
LAMP INDICATES CONDITION
Vehicle Speed
When standard mode is selected, speed displays in miles per
hour.
When metric mode is selected, speed displays in kilometers
per hour.
Over
Temperature This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the
system will automatically reduce engine power.
Electric Power
Steering (EPS)
Warning (if
equipped) This indicator illuminates briefly when the key is turned to the
ON position. If the light remains on, the EPS system is
inoperative. Your dealer can assist.
Neutral This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high
beam.
Check Engine This indicator appears if an Electronic Fuel Injection (EFI)
related fault occurs. Do not operate the vehicle if this warning
appears. Serious engine damage could result. Your dealer
can assist.
Check Battery This warning usually indicates that the vehicle is operating at
an RPM too low to keep the battery charged. It may also
occur when the engine is at idle and high electrical load
(lights, cooling fan, accessories) is applied. Drive at a higher
RPM or recharge the battery to clear the warning.
Low Fuel This lamp illuminates when fuel level in the fuel tank is low.
Oil pressure
Indicates low/high oil pressure. When illuminated, do not
operate the vehicle see authorized dealer.
Parking brake
Be sure to fully release the parking brake lever before starting
the vehicle.