BMS Beast 1000 Series, Owner'S Manual

Page: 72 / 114

MAINTENANCE
70
OIL CHECK
Always check the oil when the engine is cold. If the engine is hot when the oil is
checked, the level will appear to be overfull.
Access the oil fill cap, filter under the console cover.
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK.
3. Stop the engine.
4. Remove the dipstick. Wipe it dry
with a clean cloth.
5. Reinstall the dipstick completely.
Remove the dipstick
①
and
check the oil level.
6. Maintain the oil level between the
minimum and maximum marks on
the dipstick. Do not overfill.
7. Reinstall the dipstick.
8. Lower the cargo box and push
down securely to latch.
OIL AND FILTER CHANGE
Always change the oil and filters at the intervals outlined in the Periodic
Maintenance Chart section. Always change the oil filter whenever changing oil.
The crankcase drain plug is located on the bottom of the crankcase. Access the
drain plug through the access hole in the skid plate under the crankcase (see
next page).
Always remove all cargo from the cargo box before lifting the box to access
engine components.
CAUTION