BMS Beast 1000 Series, Owner'S Manual

Page: 74 / 114

MAINTENANCE
72
16. Reinstall the dipstick completely. Remove the dipstick and check the oil level.
17. Remove the oil fill cap and add oil as needed to bring the level to the upper
mark on the dipstick. Do not overfill.
18. Reinstall the fill cap. Reinstall the dipstick.
19. Reinstall the outlet hose to the clutch box, routing the hose under the fuel line
and spark plug wires. Make sure the clutch cover rib aligns in the notch at the
end of the outlet hose. Tighten the clamp.
20. Reinstall the fuel line and spark plug wires to the retaining clips on the outlet
hose.
21. Lower the cargo box and push down securely to latch.
22. Dispose of used filter and oil properly.
GEARCASES
GEARCASE SPECIFICATION CHART
GEARCASE LUBRICANT CAPACITY FILL PLUG
TORQUE DRAIN PLUG
TORQUE
Main
Gearcase
(Transmission)
SAE80 API
GL-5 Gearcase
Lubricant &
Transmission
Fluid
17 oz.
(500 ml) 10-14 ft. lbs.
(14-19 Nm) 10-14 ft. lbs.
(14-19 Nm)
Front
Gearcase Demand Drive
Fluid
10.1 oz.
(320 ml) 16 ft. lbs.
(23 Nm) 7.1 ft. lbs.
(9.8 Nm)
Rear
Gearcase
Demand Drive
Fluid
8.5 oz.
(250 ml) 16 ft. lbs.
(23 Nm) 14ft. lbs.
(20 Nm)