BMS Beast 1000 Series Owner'S Manual Download

Page: 14 / 114

SAFETY

LOAD/PASSENGER/TIRE PRESSURE WARNING

The Load/Passenger/Tire Pressure
warning decal is located on the front
panel of the rear cargo box

①

WARNING

• Never carry passengers in cargo

box.

• Passengers can be thrown off. This

can cause serious injury or death.

• If total payload is greater than 400

lbs., the vehicle must be operated in
LOW range.

IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF
CONTROL RESULTING IN SERIOUS INJURY OR DEATH.

• Reduce speed and allow greater distance for braking when carrying cargo.

• Overloading or carrying tall, off-center, or unsecured loads will increase your

risk of losing control. Loads should be centered and carried as low as possible
in box.

• For stability on rough or hilly terrain, reduce speed and cargo.

CAPTAIN

–INCH WHEELS

MAXIMUM CARGO

BOX LOAD

440 lbs.

(200 Kg)

TIRE PRESSURE IN

PSI (KPa)

FRONT 10 (69)

REAR 18 (125)

MAXIMUM WEIGHT

CAPACITY

INCLUDES WEIGHT OF

OPERATOR,

PASSENGERS,

CARGO, AND

ACCESSORIES

880 lbs.

(400 Kg)

Read Operation and Maintenance Manual for more detailed loading
information.

Summary of Contents for Beast 1000 Series



















































































































Search results

Summary of Contents for Beast 1000 Series

Reviews:

Related manuals for Beast 1000 Series

Brands by name

Popular brands

BMS Beast 1000 Series, Owner'S Manual

Search results

Summary of Contents for Beast 1000 Series

Reviews:

Related manuals for Beast 1000 Series

Brands by name

Popular brands