BMS Beast 1000 Series, Owner'S Manual

Page: 93 / 114

MAINTENANCE
91
STATE OF
CHARGE VOLTAGE ACTION CHARGE TIME*
*(USING CONSTANT CURRENT CHARGER @ STANDARD AMPS SPECIFIED ON
TOP OF BATTERY)
100% 12.8-13.0 volts None, check at 3
mos. from date of
manufacture None required
75%-100% 12.5-12.8 volts May need slight
charge, if no
charge given,
check in 3
months 3-6 hours
50%-75% 12.0-12.5 volts Needs charge 5-11 hours
25%-50% 11.5-12.0 volts Needs charge At least 13 hours,
verify state of
charge
0%-25% 11.5 volts or less Needs charge
with desulfating
charger At least 20 hours
CLEANING AND STORAGE
WASHING THE VEHICLE
Keeping your DW INDUSTRIES vehicle clean will not only improve its appearance
but it can also extend the life of various components.
The best and safest way to clean your vehicle is with a garden hose and a pail
of mild soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first and the
lower parts last.
2. Rinse with clean water frequently.
Water in the CVT system could cause the drive belt to become wet and slip in
the clutches. When washing the vehicle, always avoid spraying water directly
toward the CVT intake screen.
High water pressure may damage components. We recommends washing
the vehicle by hand or with a garden hose, using mild soap. Certain
products, including insect repellents and chemicals, will damage plastic
surfaces. Do not allow these types of products to contact the vehicle.
NOTICE