BMS Beast 1000 Series, Owner'S Manual

Page: 88 / 114

MAINTENANCE
86
WARNING
SETTING COMPRESSION DAMPING
Softest Position 1
Factory Position 2
Firmest Position 3
TIRES
TIRE TREAD DEPTH
Always replace tires when tread depth
is worn to 1/8” (3 mm) or less.
AXLE AND WHEEL NUT TORQUE SPECIFICATIONS
Inspect the following items occasionally for tightness, and if they've been
loosened for maintenance service. Do not lubricate the stud or the lug nut.
NUT TYPE LOCATION NUT TORQUE
Lug Nut
(Aluminum
Wheels)
Front and Rear
120 ft-lbs (163 Nm)
Lug Nut (Tapered)
Front and Rear
60 ft-lbs (81 Nm)
Operating your vehicle with worn tires will increase the possibility of skidding,
loss of control and an accident, which could result in serious injury or death.
Always replace tires when the tread depth measures 1/8” (3 mm) or less.
Improper tire inflation or the use of non-standard size or type of tires may
adversely affect vehicle handling, which could result in vehicle damage or
personal injury. Always maintain proper tire pressure. Always use approved
size and type of tires for this vehicle when replacing tires.