BMS Beast 1000 Series, Owner'S Manual

Page: 79 / 114

MAINTENANCE
77
OVERFLOW BOTTLE COOLANT LEVEL
Always check and change the coolant at the intervals outlined in the Periodic
Maintenance Chart. Maintain the coolant level between the minimum and
maximum marks on the bottle (when the fluid is cool).
1. Position the vehicle on a level surface.
2. Place the transmission in PARK.
3. Open the hood.
4. View the coolant level in the overflow bottle.
5. If the coolant level is below the safe operating range, make sure the pressure
cap is securely installed before adding coolant to the overflow bottle.
6. Reinstall the coolant bottle cap.
TIP
If coolant must be added often, or if the overflow bottle runs completely dry,
there may be a leak in the system. Your DW INDUSTRIES dealer can
inspect the cooling system.
RADIATOR COOLANT LEVEL
Check the radiator coolant level ONLY if the overflow bottle is dry. If the overflow
bottle contains fluid, the radiator level should NOT be inspected.
1. Open the hood.
2. If the overflow bottle is dry, slowly remove the radiator pressure cap.
3. View the coolant level through the opening.
4. Use a funnel and slowly add coolant as needed.
If the overflow bottle runs completely dry, there may be a leak in the system.
Your DW INDUSTRIES dealer can inspect the cooling system.
Always add coolant through the bottle filler opening, not through the radiator
pressure cap opening.
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
NOTE
CAUTION
TIP