BMS Beast 1000 Series, Owner'S Manual

Page: 69 / 114

MAINTENANCE
67
ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS HOURS CLNDR
MILES
(KM)
XU
Demand drive fluid
(front gearcase) (if
equipped)
25 H
Monthly
- Perform a break-in oil level check
XU Transmission oil 25 H
Monthly
- Perform a break-in oil level check
XU
Engine oil change
(break-in)
25 H -
500
(800)
Perform a break-in oil change
XU General lubrication 50 H 3 M
500
(800)
Lubricate all fittings, pivots,
cables, etc.
Shift Linkage
50 H 6 M
500
(800)
Inspect, lubricate, adjust
D
Steering
50 H 6 M
500
(800)
Lubricate
XU
Front and Rear
Stabilizer Bars
50 H 6 M
500
(800)
Lubricate
D
Throttle Pedal 50 H 6 M
500
(800)
Inspect for free movement;
replace pedal as needed
Throttle body air
intake ducts/flange
50 H 6 M
500
(800)
Inspect ducts for proper sealing/
air leaks
Drive belt 50 H 6 M
500
(800)
Inspect; adjust; replace as
needed
Cooling system (if
applicable)
50 H 6 M
500
(800)
Inspect coolant strength
seasonally; pressure test system
yearly
XU
Radiator (if
applicable)
50 H 6 M
500
(800)
Inspect; clean external surfaces
XU
Oil lines and
fasteners
50 H 6 M
1000
(1600)
Inspect for leaks and loose fittings
XU
Engine oil and filter
change
100 H 6 M
1000
(1600)
Change the oil and filter
XU
Front gearcase oil
100 H 12 M
1000
(1600)
Change fluid
XU Transmission oil 100 H 12 M
1000
(1600)
Change fluid
D
Fuel System
100 H 12 M
1000
(1600)
Cycle key to pressurize fuel
pump; check for leaks at fill cap,
fuel lines/rail and fuel pump;
replace lines every 2 years
XU
Cooling Hoses (if
applicable)
100 H 12 M
1000
(1600)
Inspect for leaks