BLUEBOX CX Industrial UHF
Page 61 of 126
Parameter
Description
Inventory
Mode
A byte whose bits are dedicated to manage the inventory mode, the search mode and
the ReadAfterDetect info activation parameters:
Bit
Description
Bit 7
Not used
Bit 6
Search mode (how the reader singulates tags in ‘continuous’ mode):
•
0b: Dual Target (the reader singulates tags in both A and B
states)
•
1b: Single Target (the reader singulates only tags that are in A
state)
Bit 5
Activation of the ReadAfterDetect with custom info as defined in
ReadAfterDetect Password, Bank, Address, Length and EPC Info
parameters (0b=OFF, 1b=ON)
Bit 4
Activation of the ReadAfterDetect with auto TID info (0b=OFF, 1b=ON)
Bit 3 … 0
Inventory mode (how the reader do
es an inventory in ‘continuous’
mode):
•
0x0: Fast Multi Tag: Inventory mode that does not take the tag
to the Opened but to the Acknowledged state. This inventory
mode is not as secure as the standard mode, but it is faster
•
0x1: Fast Single Tag: The same inventory mode like the Fast
Multi Tag, but with the slot count of 1. This has the effect that
no anticollision procedure is performed
•
0x2: Standard Multi Tag: Inventory mode like defined in the EPC
C1G2 standard
•
0x4: Standard Single Tag: The same inventory mode like the
Standard Multi Tag, but with the slot count of 1. This has the
effect that no anticollision procedure is performed
Note that allowed values are:
Inventory Mode
ReadAfterDetect
with Custom Info
ReadAfterDetect
with Auto TID
Search Mode
Fast Multi Tag,
Fast Single Tag
Disabled
Disabled
Dual Target, Single
Target
Standard Multi
Tag, Standard
Single Tag
Disabled
Disabled
Dual Target, Single
Target
Standard Multi
Tag, Standard
Single Tag
Disabled
Enabled
Dual Target, Single
Target
Standard Multi
Tag, Standard
Single Tag
Enabled
Disabled
Dual Target, Single
Target
R->T Link
Frequency
R->T link frequency:
•
0x00: 40 kHz;
•
0x02: 160 kHz;
•
0x04: 256 kHz;
•
0x05: 320 kHz;
•
0x06: 640 kHz.
