BLUEBOX CX Industrial UHF
Page 52 of 126
Parameter
Description
•
Decimal 0 … 99 for time in seconds (0 … 99 seconds);
•
Decimal 100 … 199 for time in minutes (0 … 99 minutes).
3.2.8
‘Spontaneous’
Message
This section provides details on the
configurable ‘spontaneous’ message
parameters of the
BLUEBOX
Parameter
Description
Range
Default
Message on
Serial
Interface
‘Spontaneous’ message on
serial interface
activation/deactivation.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Enabled
Message on
Ethernet (TCP
Server, TCP
Client)
‘Spontaneous’ message on Ethernet (TCP server
or TCP client, see the remote server parameters)
interface activation/deactivation.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Enabled
Message on
Data Bus
Interface
‘Spontaneous’ message on
data bus interface
activation/deactivation.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Enabled
Message on
CAN Bus
‘Spontaneous’ message on CAN bus interface
activation/deactivation.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Enabled
Message on
Bluetooth
‘Spontaneous’ message on Bluetooth interface
activation/deactivation.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Enabled
Format
The ‘spontaneous’ message format.
•
0: Message is sent with BlueBox protocol
rules;
•
1: Message is sent, without any control
character, in dual char string form;
•
2: Message is sent like in option 1 but at
the end CR will be appended;
•
3: Message is sent like in option 1 but at
the end CR+LF will be appended.
•
4: Message is sent, without any control
character, in ASCII form. Non printable
chars (0x20..0x7E) are replaced with ‘.’
(0x2E).
0
1
2
3
4
5
6
7
8
9
10
0
