BlueBox IDTRONIC CX Industrial UHF, Manual

Page: 38 / 126

BLUEBOX CX Industrial UHF Page 38 of 126
Parameter Description Range Default
Mode with
Inputs
‘Continuous’
Mode
‘Continuous’ mode. If activated overrides the
trigger ‘continuous’ mode with inputs setting.
Disabled
Enabled
Enabled
The general parameters a re managed through the ‘ Read RAM General
Parameters ’ and ‘ Write ROM General Parameters’ commands as described in
protocol technical manuals where the parameters 1…7 fields with default values
are:
1 2 3 4 5 6 7
Device
Address
Serial1 Serial2 0x00 0x00 Filter Time
Functional
Flags
0xFF 0x48 0x10 0x00 0x00 0x01 0x80
Where:
Parameter Description
Device
Address
Device address of the reader on serial interface in the range 0 … 255 .
Serial1
Serial interface communication settings.
• High nibble: baud rate:
o
0x0: 1200 bps;
o
0x1: 2400 bps;
o
0x2: 4800 bps;
o
0x3: 9600 bps;
o
0x4: 19200 bps;
o
0x5: 38400 bps.
• Low nibble: data bits:
o
0x7: 7 bits;
o
0x8: 8 bits.
Serial2
Serial interface communication settings.
• High nibble: stop bits:
o
0x1: 1 bits;
o
0x2: 2 bits.
• Low nibble: parity:
o
0x0: None;
o
0x1: Even;
o
0x2: Odd.
Filter Time
Reading management filter time (0 setting is internally overwritten with 1 second):
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);