BLUEBOX CX Industrial UHF
Page 72 of 126
6
Installation
6.1
General Instructions
•
Several devices with integrated antenna (items 532yU-opt1-rrr) installed
next to each other interfere if they are not correctly configured.
•
When mounting several nearby devices with integrated antenna (items
items 532yU-opt1-rrr) adhere to the minimum distances between them.
•
Installing a device with inyegrated antenna (items 532yU-opt1-rrr) in or
on metal reduces the read and write distance.
•
Keep the device away from direct sunlight, high humidity, extreme
temperatures, and sources of electromagnetic interference. Any
combination of these conditions might degrade performance or shorten
the life of the device.
•
Connect the device using a suitable cable as defined in electrical
connections section.
•
Power the device using a suitable external power supply as defined in
electrical connections section. The boot sequence begins in either case
when power is supplied to the device. This sequence typically completes
within 60 seconds. After the boot sequence finishes, the device accepts
commands, not before. The LED on the device alerts you to the status as
defined in status indications section.
6.2
Notes on Tag Mounting
•
For installation in and on metal tags provided for this purpose must be
used.
•
The tag must be placed in the reading area of the device antenna. The
angle of aperture and the operating distance must be adhered to.
•
The orientation of the device antenna axis must correspond with the axis
of the tag for best performance.
6.3
Avoiding Interference
The device usually operates without any interference caused by radio
communication if it is
•
use as inteded;
