BLUEBOX CX Industrial UHF
Page 54 of 126
The ‘spontaneous’ mess
age parameters are stored in configuration page nr.
0x09 and are managed throug
h the ‘Read RAM/ROM Configuration Parameters’
and ‘Write RAM/ROM Configuration Parameters’ commands as described in
protocol technical manuals where the parameters 1…7 fields wi
th default values
are:
1
2
3
4
5
6
7
0x00
Interface
Format
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Where:
Parameter
Description
Interface
The interface where to send the ‘spontaneous’ message activation/deactivation. Single
bits are dedicated to enable (0 value) or disable (1 value) an interface:
Bit
Description
Bit 7
Not used
Bit 6
Not used
Bit 5
Bluetooth
Bit 4
CAN bus
Bit 3
Data bus
Bit 2
Not used
Bit 1
Ethernet (TCP server, TCP client);
Bit 0
Serial interface
Format
The ‘spontaneous’ message format:
•
0x00: Message is sent with BlueBox protocol rules;
•
0x01: Message is sent, without any control character, in dual char string form;
•
0x02: Message is sent like in option 1 but at the end CR will be appended;
•
0x03: Message is sent like in option 1 but at the end CR+LF will be appended.
•
0x04: Message is sent, without any control character, in ASCII form. Non
printable chars (0x20..0x7E) are replaced with ‘.’ (0x2E).
•
0x05: Message is sent like in option 4 but at the end CR will be appended.
•
0x06: Message is sent like in option 4 but at the end CR+LF will be appended.
•
0x07: Message is sent like in option 1 with an STX char at the begin of the
message.
•
0x08: Message is sent like in option 2 with an STX char at the begin of the
message.
•
0x09: Message is sent like in option 3 with an STX char at the begin of the
message.
•
0x0A: Message is sent like in option 4 with an STX char at the begin of the
message.
•
0x0B: Message is sent like in option 5 with an STX char at the begin of the
message.
