BLUEBOX CX Industrial UHF
Page 106 of 126
14
Document Revision History
Date
Revision
Description
19/05/14
2.00
First release.
08/07/14
2.01
Added the reading performance tests (Section 2.1)
results in section 2.
Added the antenna switch time in readers with up to 2
antennas in section 2.
Corrections in the operating features (section 3), added
parameters in the general configuration page, RF
configuration page and EPC C1G2 page and related
commands (sections 4.1, 4.3, 4.4, 4.8, 4.10 and 4.11).
Added the North America (FCC compliant region)
frequencies in section 3.
Ad
ded the ‘reading test’ mode description in section 3
and relative command (section 4.14).
Added the BlockWrite command description in section
4.27.
Added the antennas section (section 9).
Added the regions of operation description as appendix
(appendix B).
10/02/15
2.02
Added the 1.xx firmware reference, now this technical
manual is applicable to both firmware versions 1.xx and
2.xx.
Added the
‘spontaneous’ message on Ethernet interface
as TCP Client description in section 3 and 4.33.1.
Added a different paragraph for every configuration
parameters in section 3.
Added the Remote IP Configuration parameters (section
3.3) and its management commands (sections 4.3 and
4.11).
Added the Program EPC of Type C Tags command
description in section 4.28.
Changes in the status indications in section 8.
23/06/15
2.03
Added the RF sensitivity parameter in RF parameters
section (section 3.4) and RF parameters commands
management (sections 4.6 and 4.15).
Moved Q value and Session in EPC C1G2 (Class-1
Generation-2) parameters section (section 3.5).
Added the RS232 DB-9
–
M12 connections description
(appendix C).
Added the .inf file (appendix D).
