BLUEBOX CX Industrial UHF
Page 107 of 126
Date
Revision
Description
Added a driver installation guide on Windows 8 OS
(appendix E).
26/10/15
2.04
Changed the firmware version reference in the first page.
Added the RF sensitivity parameter in technical
specification table (section 2).
Added the ReadAfterDetect configuration parameters
description in section 3.5 and EPC C1G2 #2 configuration
page management commands (section 4.8 and 4.18).
17/05/16
2.05
Changed the firmware version reference in the first page.
Added the PoE IEEE 802.3af-2003 Mode A and Mode B
specifications in section 2.
Added the ‘trigger’ mode and ‘gate’ mode description in
section 3, and related parameters in subsections 3.x.
Changed the I/O parameters programming and reading
descriptions due to new added features (sections 4.9 and
4.19).
Added the direction info in data request, queue request
and spontaneous message descriptions (sections 4.26,
4.27 and 4.38.1).
Corrected the M12 Ethernet connection description in
section 6.
03/06/16
2.06
Changed the firmware version reference in the first page
Added the output 1 activation time description in sections
3.1 and 3.4.
Changes in general and I/O parameters configuration
commands (sections 4.2, 4.7, 4.11 and 4.16).
Added the antennas auto tuning command (section
4.38).
19/09/16
2.07
Added the reader’s firmware versions obje
ct of this
manual.
Changes in the technical specification formatting (section
2).
Added the operating features and description of the
configurable parameters (section 3).
Added the test modes description and auto antenna
tuning description in section 3.
Deleted the communication protocol section.
Deleted the supported transponders appendix.
18/11/16
2.08
Corrected the RS485 connections description in the
connection.
