Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 25 / 62

25
IN
S
TA
LL
A
TI
ON
Installing and removing
the bushing
General
A bushing consists of two segments in
the elevator body . The body and the
latch must be open in order to equip the
elevator with the required bushing.
Make sure that both bushing segments
have the same size and serial number.
WARNING: b
efoRe ReplAcING the bushING
,
mAke suRe thAt theRe Is No hydRAulIc
pRessuRe oN the hydRAulIc lINes ANd thAt the
coNNectING lINes ARe dIscoNNected
.
Removal of the bushings
• The elevator body must be open.
• Remove the screws on the top of
the elevator.
• Screw the handles into the bushing
segment.
• Turn the segments for removal.
Installation of the bushing
• Before installing a new bushing,
the seating area in the elevator
must be cleaned and lubricated.
• Screw the handles into the bushing
segment.
• Turn the segment into the body.
• Fixate the segments with the
screws on top of the elevator.
• Install new lock wire to secure the
screws.
Handling of bushings
Handle 613903
Turn out