Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 11 / 62

11
D
E
S
C
R
IP
TI
ON
Elevator body and hydraulic closing system
When the elevator is open, the drill pipe can be placed in the elevator.
When the elevator is closed, the elevator sends a hydraulically signal.
The body takes the load through the bushing system and transfer it to the elevator links.
Bushing System
Exchangeable bushings allow to run the elevator for different tubular and sizes, see chapter „Size Components“.
Opening and Closing Mechanics
Body and latch of the elevator are actuated by hydraulic cylinders.
The cylinders are installed in the hydraulic areas of the elevator in a protected way.
Closing signal unit
When the bodies are completely closed and latched, the closing signal in the elevator is actuated.
* If not otherwise stated in the databook
Available Pipe Size Range (Bushing System)
VES-HCL 350
Drill Pipe
2.3/8“- 6.5/8“
Drill Collars 3.1/2“- 6.3/4“
Casing 3.1/2“- 7“
Tubing
2.3/8“- 5.1/2“
VES-HCL 350 Center Latch Elevator
Temperature working range ambient - 20° C to + 60° C*
- 4° F to 140° F*
Load Capacity 350 sh tons
Part number 613000-Y-H-F (with closing signal)
API test load
525 sh tons
Weight
425 kg (937 Lbs)
Size O.D. 2.3/8“-7“
Bushings 613902-BC
Elevator Links 2.1/4” up to 3.1/2” (250t to 500t)
Working pressure Min 130 bar (1,885 Psi),
Maximum allowed pressure 210 bar (3045 Psi)
Required Flow rate Min 6,6 Gpm (25 l/m)
Max 25 Gpm (94 l/m)
Minimum required clearness of hydraulic
fluid
NAS 9
Max temp hydraulic fluid + 60° C
+ 140° F
Technical Data