Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 26 / 62

26
IN
S
TA
LL
A
TI
ON
Installation Checklist
Basically the elevator has to be installed as shown in the manual.
OK
o
Make sure the required bushings are installed before first use
OK
o
Make sure the bushings are fixated with the screws & lock wired
OK
o
Check 18° shoulder with gauge P/N 600168 for wear
OK
o
Make sure the feedback valve is correctly adjusted.
OK
o
Make sure the hydraulic pressure is switched on.
Hydraulic Connections
OK
o
Make sure QD`s are clean.
OK
o
Make sure the controls are connected to the Hydraulic Power Supply.
OK
o
Make sure the controls are switched on.
OK
o
Make sure the Hydraulic Lines are connected.
Function test
OK
o
Close elevator.
OK
o
Open elevator.
OK
o
Check signal elevator closed and latched“ is present.
OK
o
Check loose service tools are removed from the elevator.