Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 18 / 62

18
C
OM
M
IS
ION
ING
S
2. COMMISSIONING
Commissioning VES-HCL 350 Center latch Elevator
Blohm + Voss strongly recommends to accomplish the Elevator commissioning with the
Blohm + Voss Commissioning.
Read manual before first use !
OK
o
Check crew is aware of all danger regarding handling the B+V tool.
OK
o
Go through manual with crew.
Prior to use of the Blohm+Voss Elevator following checks must be carried out :
Scope of supply
OK
o
Cross check all delivered parts
Hydraulic Characteristics
OK
o
Operating pressure 130 bar / 1885 PSI
OK
o
Volumetric flow 6.6 Gpm (25 l/m) to 25 Gpm (94 l/m)
OK
o
Hydraulic filter and regulator Filter installed in pressure line
Check and Lubrication
OK
o
Check for any damage and repair if needed
OK
o
Check elevator is in closed position.
OK
o
Check for correct seating of Hinge Pin and Latch Pin.
OK
o
Check Hydraulic Supply lines are disconnected.
OK
o
Apply grease to all greasing points until grease is visibly coming out of the
bores.
OK
o
Check if elevator is installed as outlined in manual.
OK
o
Connect feedback lines.
OK
o
Check of all bolts, nuts, washers and lock wire are in place.