Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 37 / 62

37
MAI
N
TE
NAN
C
E
&
I
N
S
P
EC
TI
ON
Check Category I (Ongoing observation)
Observe during operation for inadequate performance
Check List Category II (Daily)
CHECK FOR THE FOLLOWING GENERAL ISSUES (but not limited to):
DESCRIPTION
CHECKED SIGNATURE
1 Complete front page of check list for the records OK
2 Check for correct size of elevator or bushings OK
3 Check correct function elevator feed back signal OK
4 Check state of lubrication OK
5 Check functioning of elevator as a whole OK
Remarks
CHECK FOR LOOSE ITEMS, ESPECIALLY FOR (but not limited to):
DESCRIPTION
CHECKED SIGNATURE
1 Hinge pins, bolts and retainers OK
2 Fixation of bushing segments OK
3 Screws, bolts, nuts, washers, retainers, springs and lock wire OK
4 Link block screws (check and tighten with 399 LBs.Ft / 542 Nm) OK
5 Check completeness and condition of warning plates and labels OK
Remarks
CHECK FOR CRACKS, ELONGATION, DAMAGE AND CORROSION, ESPECIALLY FOR (but not limited to):
DESCRIPTION
CHECKED SIGNATURE
1 Elevator Body and Door OK
2 Hing pins, bolts, nuts OK
3 Bushing Segments OK
4 Latch and Lug OK
5 Closing cylinder OK
6 Latch cylinder OK
Remarks
HYDRAULIC
DESCRIPTION CHECKED SIGNATURE
1 Check for loose fittings, pipes, valves OK
2 Check for hydraulic leaks (hoses, valves and cylinders) OK
3 Check condition of hydraulic couplings and connection hoses OK
4 Check for correct functioning of the Elevator Closing Signal OK
Remarks
_________________________________ _______________________________
SUPERVISOR
DATE