Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 30 / 62

30
MAI
N
TE
NAN
C
E
&
I
N
S
P
EC
TI
ON
General
If cracks, excessive wear etc. is recognised, contact Blohm + Voss Oil Tools or an
authorised service company.
Weldings of the castings should be done only by Blohm + Voss Oil Tools or an
authorised service company in according to Blohm+Voss welding procedure.
A regular preventative maintenance program should be established for all
elevators. These written maintenance procedures should be given to the crew or
maintenance personnel.
5. MAINTENANCE AND INSPECTION
Grease point 1 on the elevator
Grease point 2+3 on the elevator
Grease point 4 on the elevator
Daily lubrication
The elevator needs to be lubricated regularly on the following points. Use a grease
gun:
Grease points:
1. On top and bottom of the latch pin (2 nipples each).
2. Lubricate springs daily.
3. Check and lubricate latch opening arrangement daily.
4. On top and bottom of the hinge pin (2 nipples each).
Daily Inspection
Inspect visually:
•
Latch Opening Arrangement.
• Presence of all bolts, nuts, safety elements, lock wire.
• Function of the Feedbacksignal.
Daily Test
Function the elevator daily. If any damage or malfunction were found, take the
elevator out of service for repair.
Locking of screws
All Screws are normally secured by a mechanical bolt lock or with a safety wire.
All other screws are secured by metal adhesive (Locktite). Ensure the correct
retention method is applied.