Blohm + Voss Oil Tools 613000-Y-H-F, Original Instructions Manual

Page: 12 / 62

12
D
E
S
C
R
IP
TI
ON
Couplings
Screw couplings male and female with connecting thread
NPT – 3/8“ inner thread.
All hydraulic connections have a bushing and a plug.
Safety equipment
Closing signal
When the latch is completely closed, line “C” triggers a
hydraulic pressure signal of 110 to 120 bar as a feedback
signal, indicating elevator closed.
Improper / Unsafe Use
The VES-HCL350 Elevator must only be used for the
designated purpose.
When using the VES-HCL350 Elevator, the load of 350 sh
tons must never be exceeded.
Identification
The identification area clearly identifies the Elevator area
(manufacturer, type, material, part number, serial number,
date of manufacture). It is important to keep this information
ready for the purpose of service and repair work.
Functioning
The HCL-350 elevator is designed in 2 halves of about
the same weight for proper balance and easier opening
and closing. Itis equipped with a latch and a latch lock
combination. When the elevator is open, the pipe will be
placed in the bushings.
The HCL-350 elevatorhas exchangeable bushings, which
allows the elevator to run with different types of pipes and
pipe didameters.
1. Elevator is tilted to the pipe.
2. Elevator will close on close command.
3. Once the elevator is closed, latched and locked, the
driller will get a feedback signal stating this.
4. Now the driller can pick up the pipe.
5. Opening the elevator works vice versa