Blackrock Microsystems NeuroPort Instructions For Use Manual Download Page 70

Page: 70 / 74

Revision 1.00 / LB-1070 – NeuroPort Biopotential Signal Processing System IFU
© 2021 Blackrock Microsystems, LLC

Cleaning, Maintenance, and Disposal

Cleaning

No components of the NeuroPort System are provided sterile, and they cannot be

sterilized, but devices may be cleaned by wiping surfaces. To clean the NeuroPort

System, the exterior of NeuroPort System devices may be wiped down water or

isopropyl alcohol. Sanitizing wipes should not be used on plastic components of the

system. Dust and debris on the exterior connectors/ports may be removed with

compressed air.

Maintenance

The system does not require any scheduled maintenance or calibration. For issues with

the system, see the troubleshooting section and/or RMA sections below.

Disposal

All devices, both used and unused, should not be disposed with household waste.

Return to a recycling point for electric and electronic devices.

Magnetic Resonance

The NeuroPort System has not been evaluated for safety and compatibility in the MR

environment. The NeuroPort System has not been tested for heating, migration, or image

artifact in the MR environment. For this reason, the device is not considered safe to use in an

MR environment.

Summary of Contents for NeuroPort











































































Search results

Summary of Contents for NeuroPort

Reviews:

Brands by name

Popular brands

Blackrock Microsystems NeuroPort, Instructions For Use Manual

Search results

Summary of Contents for NeuroPort

Reviews:

Brands by name

Popular brands