93
TX/CX 4000
COMMAND 38: TRUE LPI
Because laser printers have a non-printable border around the edge of a page,
6 LPI and 8 LPI spacing is compressed slightly to enable 66 lines and 88 lines
to be printed on 11-inch long paper. This can occasionally cause a problem,
especially when using preprinted forms that must align precisely. Command
38 enables a user to override the laser printer LPI compression.
VALUE
DESCRIPTION
*0
Compress the vertical LPI spacing
1
Print using true 6 and 8 LPI spacing
NOTE
If true LPI is selected, the user needs to adjust the document formats to
allow for the reduced number of lines that can be printed per page, or the
extra lines may print onto another sheet of paper.
Example:
&%Z38,1
Specifies that vertical spacing prints using
true 6 and 8 LPI
COMMAND 39: CPT ENDING DELIMITER CHARACTERS
Specifies the two characters to be used for the ending delimiter characters for
Command Pass-Thru.
VALUE
DESCRIPTION
XXYY
XX is the ASCII hexadecimal value of the first character
and YY is the ASCII hexadecimal value of the second
character.