Black Box TX/CX 4000, Manual, Page: 13 / 150

13
TX/CX 4000
4. Configuration—Twinax
Table 4-1 shows the recommended
emulation and device ID on the
different host systems.
4.1 Host Configuration
Before operating the TX/CX 4000
in twinax mode, you must configure
the IBM host with a cable address
and device ID for the printer. See
your system operator or system
manuals for details. You must also
set the twinax address on the
TX/CX 4000.
Table 4-1. Emulation and Device IDs for Various Host Systems.
Host System Printer Used Emulation Device ID
AS/400, S/38, S/36 Laser printer (using 3812 3812-1
HP PCL commands)
AS/400, S/38, S/36 Matrix printer 4214 4214-2
(printing NLQ)
AS/400, S/38, S/36 Matrix printer 5224 5224 (2P)
(S/34)
AS/400, S/38, S/36 Specialty printer 5256 5256
S/34 (e.g., label printer)