manualshive.com logo in svg

Black Box TX/CX 4000, Manual, Page: 67 / 150

Share
Download
Black Box TX/CX 4000 Manual Download Page 67

67

TX/CX 4000

5.17.2  U

SER

-D

EFINED

F

ONTS

(HP PCL

ONLY

)

The TX/CX 4000 supports a vast
variety of fonts. In addition, the
User-Defined Fonts feature allows
assignment of new or existing font
IDs to different printer-resident
fonts or fonts from an optional font
cartridge. Up to 10 new pairs of font
IDs and fonts can be created.

For example, if an HP LaserJet 4Si

is being used, the font ID 11by
default represents Courier 10 cpi.
You can assign the font ID 11 to a
different font (e.g. Courier bold 10
cpi), by sending the Host/PC
download command
&%Z21,0,11(<(12U<(s0p10h12v0s3b
4099T) to the printer. Font ID 11
has now been redefined as Courier
bold 10 cpi. Consult the printer’s
user’s guide for the information
needed to write the string.

In the same manner, personalized

font IDs can be assigned to printer-
resident fonts or to fonts from an
optional font cartridge. These fonts
can then be called up by using the
newly assigned font ID, the same way
the standard printer-resident fonts
are called up.

Summary of Contents for TX/CX 4000























































































































































Reviews:

No comments