Black Box TX/CX 4000 Manual Download Page 140

Page: 140 / 150

140

TX/CX 4000

Table 8-2. Problem Resolution Guide (continued).

Problem or Message

Probable Cause

Action

Host is not operating

Check host system.

Damaged or improper

Check host cabling for

cabling

damage or improper

connection.

Twinax cable improperly

Make sure the prior

terminated

device is not terminated

(some PC emulator cards

may terminate mid-line).

Twisted pair cabling is

Activate Star Panel

not attached to an “active” Overdrive (front panel or

or boosted hub

host/PC download

command 20)

“No Sync” message and

Address conflict with

Make sure no other

“Sync” flash alternately

another twinax device

devices on this cable

on the cable

have the same address.

Damaged or improper

Check host cabling for

host cables

damage or improper

connection

“Parallel Out - Not Ready”

Printer fault, such as

Make sure the printer has

or “Serial Out - Not Ready”

paper out, paper jam,

paper, is clear of jams,

message on front panel

etc.

Summary of Contents for TX/CX 4000






















































































































































Search results

Summary of Contents for TX/CX 4000

Reviews:

Black Box TX/CX 4000, Manual, Page: 140 / 150

Search results

Summary of Contents for TX/CX 4000

Reviews: