58
TX/CX 4000
The following envelope sizes are
supported by the TX/CX 4000:
• Monarch—3-7/8" x 7 1/2"
• Commercial 10—4-1/8" x 9-1/2"
• International DL—110 mm x 220
mm
• International D5—162 mm x 229
mm
5.10.2 D
OCUMENT
/E
NVELOPE
P
RINTING
A letter and an envelope can be
printed from DisplayWrite/36 or
OfficeVision/400 in the same
document by following this
procedure:
1. Set the format for the letter and
enter the letter file. On the first
typing line, press CMD20 for
Change Format.
2. Select 1 for Document Options,
then another 1 for Document
Format. Select 3 for
Typestyle/Color.
3. Select the font ID Number for
the letter, such as No. 11, 86,
etc., then press ENTER.
4. From the Document Format
screen, select option 4 for Page
Layout/Paper Options. Scroll to
the second screen of these
options and select a paper size of
8.5" (width) x 11" (length)
inches and paper source 1. If the
letter is more than one page,
select paper source of 1 for the
following pages. Press ENTER to
return to the Document Format
screen, then CMD 12 to return
to the Document Options
screen.
5. Now set up the Alternate Format
for the envelope. Select 2 for
Alternate Format, then 3 for
Typestyle/Color. Select the font
ID for the envelope and press
ENTER to return to the
Alternate Format screen.
6. Select 4, Page Layout/Paper
Options. Choose a first typing
line of 11, then scroll down to
the second screen of the options
and choose a paper width of 7.5
(monarch size) or 9.5
(commercial, or #10 size) and a
paper length of 4 inches. For a
paper source, select 5 for
Envelope Feed. Press ENTER to
return to the Alternate Format
screen.
7. Select option 1 for Margins and
Tabs and make the left margin 1.
Press ENTER and CMD3 until
you are back in the document.
8. Type in the letter. When done,
add in a page end by pressing
ALT P.